SLID’UP 110 – Sliding closet door hardware kit for 2 or 3 bypass doors up to 100 lbs each
for 2 or 3 bypass doors up to 100 lbs each
We do not sell doors. We only sell the sliding hardware.
We normally have every product in stock. If an item is out of stock, we will inform you on the website.
For almost all our sliding hardware, a kit for additional door(s) exists. However, we do offer many sliding hardware for two or even three doors. You can find our kits for additional door(s) here: https://www.slidup.com/us/product-category/bi-pass-door-hardware/spare-parts-bi-pass-door-hardware/rollers-kits-bipass-door-hardware/
Yes absolutely! You can align as many tracks as you need.
Yes, but you need to make sure to use double brackets to mount two tracks in parallel. Please refer to the product description to figure out how many brackets are needed (if possible for the range selected). You can also make your own brackets.
Yes, there is approximately a 3/16 in (5 mm) rectification on most of our sliding systems and hardware.
All tracks and valences are silver. However, you do have the ability to paint them. We advise you use a high quality paint.
All of our products are brand new.
Yes, it depends on the sliding door hardware. Before purchasing one, make sure that your door respects the maximum door weight indicated on the product specification sheet.
Yes we do offer a soft-closer for the SLID’UP 110 range. You can find it here: https://www.slidup.com/us/product-category/bi-pass-door-hardware/spare-parts-bi-pass-door-hardware/soft-closers-bipass-door-hardware/
If you want a soft opening OR a soft closing, you need 1 soft-closer. If you want a soft opening AND a soft closing, you need 2 soft-closers.
No, you do not need a longer track.
Doors cannot get off tracks. In every kit, we provide door stoppers that must be placed at each end of the track.
Yes, our kits include a bottom guide. We also sell them separately. You can find our bottom guides here: https://www.slidup.com/us/product-category/other-hardware/bottom-guides/
Our kits do not include accessories such as handles or locks. Those products are sold separately. You can find them in our “other hardware” category here: https://www.slidup.com/us/product-category/other-hardware/
The rail SLID’UP 110 is made of aluminum.
Our track range from 39″ to 106″. On each product sheet, you can find all the track dimensions available for each range. Our tracks are recuttable and can be aligned to obtain a longer track.
Yes, all our products come with a 5-year warranty.
Find accessories that can be used with this product
Max Door Weight: 100 lbs
Door Weight: 33 lbs to 100 lbs
Max Door Weight: 100 lbs Track Length: from 59″ to 106″
31 review(s)
97% customers recommending this product
Have not installed yet waiting on my custom doors to by built.
Therese S. 10/09/2024 following an order made on 25/08/2024
Reply from SLID'UP on 11/09/2024 Thank you for your feedback Therese! SLID'UP Team
Worked well.
Denton A. 26/06/2024 following an order made on 04/04/2024
Reply from SLID'UP on 26/06/2024 Thank you for your feedback Denton! SLID'UP Team
Very high quality and the customer support is very good! Thank you for the help!
Oscar I. 24/06/2024 following an order made on 27/03/2024
Reply from SLID'UP on 26/06/2024 Thank you for your feedback Oscar! SLID'UP Team
easy ordering, best rails we've seen for a somewhat difficult problem.
Eric W. 24/06/2024 following an order made on 14/04/2024
Reply from SLID'UP on 26/06/2024 Thank you for your feedback Eric! SLID'UP Team
Easy to install, sturdy, and works smoothly. Highest quality product available - so much better than the big box stores.
Suzanne K. 23/06/2024 following an order made on 24/02/2024
Reply from SLID'UP on 26/06/2024 Thank you for your feedback Suzanne! SLID'UP Team
All our products are shipped from our warehouse located in Lawrenceville, Georgia.