SLID’UP 100 – Sliding cabinet door hardware kitfor 2 bypass cabinet doors up to 20 lbs each
SLID’UP 100 – Sliding cabinet door hardware kit
Do you sell the door to go with the sliding door hardware?
We do not sell doors. We only sell the sliding hardware.
Do you have every product in stock?
We normally have every product in stock. If an item is out of stock, we will inform you on the website.
Regarding sliding hardware for one door, can a second door be added?
For almost all our sliding hardware, a kit for additional door(s) exists. However, we do offer many sliding hardware for two or even three doors. You can find our kits for additional door(s) here: https://www.slidup.com/ca/en/product-category/spare-parts/gears/
Can the tracks and valences be cut to size?
Yes, all our tracks and valences can be cut to size. We perform this service free of charge. Just indicate in the comment section of your order and mention the exact length to be cut, in inches or centimeters.
Can I align multiple tracks to increase the overall length?
Yes absolutely! You can align as many tracks as you need.
Can I install bypass doors with a wall mounted set-up?
Yes, but you need to make sure to use double brackets to mount two tracks in parallel. Please refer to the product description to figure out how many brackets are needed (if possible for the range selected).
You can also make your own brackets.
My floor is not straight, is there a way to rectify it?
Yes, there is approximately a 3/16 in (5 mm) rectification on most of our sliding systems and hardware.
Do you offer more color options for tracks and valences?
All tracks and valences are silver. However, you do have the ability to paint them. We advise you use a high quality paint.
What is the condition of the products?
All of our products are brand new.
Is there a maximum weight for a sliding door?
Yes, it depends on the sliding door hardware. Before purchasing one, make sure that your door respects the maximum door weight indicated on the product specification sheet.
Do you offer soft close mechanisms?
We do not offer soft close mechanism for the SLID’UP 100 range.
What prevents the door from getting off the track?
Doors cannot get off tracks. In every kit, we provide door stoppers that must be placed at each end of the track.
Does your kit come with a guide for the bottom of the door?
Yes, our kits include a bottom guide. We also sell them separately. You can find our bottom guides here: https://www.slidup.com/ca/en/product-category/other-hardware/bottom-guides/
Do your kits include door handles or locks?
Our kits do not include accessories such as handles or locks. Those products are sold separately. You can find them in our “other hardware” category here: https://www.slidup.com/ca/en/product-category/other-hardware/
Are your rails made of aluminum or galvanized steel?
It depends on the range. We offer aluminum, galvanized steel, or metal tracks. The track material is specified on each product sheet.
What are the dimensions of your tracks?
Our tracks vary between 39” and 118”. On each product sheet, you can see all of the track dimensions that are available for each range. Our tracks can be cut to size or aligned to create a longer track.
Does SLID’UP hardware come with a warranty?
Yes, all our products come with a 5-year warranty.
All the reviews
The sliding parts seem weak. I worry about their longevity. Also the rails at one end were cut right in the middle of a screw hole. Another 5mm would have allowed for an extra support screw.
Robert G. 18/09/2020 following an order made on 29/06/2020
Reply from Robert+G. on 18/09/2020 Thanks for your feedback Robert, I will forward your comments to the concerned department. SLID'UP Team
The system was easy to understand and install, however I am disappointed in the amount of effort required to move the cabinet door along the slide. I was hoping for a door that would slide as opposed to having to be pushed along the "c" channel with significant force. This is somewhat awkward for moving a lower cabinet door. My application is for a single door which weighs 12 pounds.
Wayne W. 10/06/2020 following an order made on 11/05/2020
Unfortunately the quality of this product is not very good. The materials are cheap. I had to drill more holes on the top bar because there weren't enough. The plastic sliders are cheap and don't slide very smoothly. Would've preferred something with wheels. The bottom plastic separators also look cheap
Anonymous A. 28/08/2019 following an order made on 29/07/2019
Reply from Anonymous+A. on 05/11/2019 William, we are very sorry to read that. We don't understand, our products are manufactured in Europe and are subject to high quality controls. Next time, don't hesitate to reach us in order to explain your project. We will find together the best fitting products! HSS Team